Home

UX-CDU series products

UX-CDU product features 1. Concentrated intensification for local heating applications 2. Easy to install-both end plate brackets allow ground assembly and lifting in place 3. For negative pressure equipment, due to the proximity of the fan and the burner, the wiring cost is reduced

Key words:

Classification:

Radiant heating series products

Hotline:

+86-22-87938925

Product Message

UX-CDU product features

1. Concentrated intensification for local heating applications

2. Easy to install-both end plate brackets allow ground assembly and lifting in place

3. For negative pressure equipment, due to the proximity of the fan and the burner, the wiring cost is reduced

(I) micro positive pressure (The micro positive pressure), U type, monomer (Single) series (this kind of equipment is suitable for exhaust gas)

Technical Parameters of UX-CDU Series Products

Equipment Model	UX-CDU23	UX-CDU35	UX-CDU40	UX-CDU45	UX-CDU50
Heating capacity (kW)	23	35	40	45	50
Heating capacity (kcal/h)	19780	30100	34400	38700	43000
Gas Supply Requirements	Air inlet interface: 1/2 "thread; Natural gas pressure range at the gas inlet of natural gas equipment: 1500Pa ~ 3500Pa, gas pressure at the equipment nozzle: 875Pa; The pressure range of liquefied gas at the air inlet of liquefied gas equipment is 3000Pa ~ 5000Pa, and the gas pressure at the equipment nozzle is 2625Pa.
Gas consumption of natural gas (m³) Gas calorific value: 9000kcal/m³	2.19	3.33	3.81	4.29	4.76
LPG gas consumption (m³) Calorific value of gas: 25000kcal/m³	0.79	1.20	1.38	1.55	1.72
Power Supply Requirements	220V，50Hz； Single-unit equipment, power distribution of each set of equipment: 65W (including burner: 5W, small fan: 60W);
Total length (m)	3.5	6.5	6.5	9.5	9.5
Total width (mm)	916	916	916	916	916
Total height (mm)	373	373	373	373	373
Fresh Air Duct and Exhaust Duct Interface size (mm)	102
Recommended minimum installation height (m)	3.1	4.3	4.8	5.0	5.2
Weight (kg)	52	83	83	114	114
With spoiler	√	√	×	×	×
Distance from combustibles (mm)
Upper end of reflector	50	100	100	100	100
Both ends of the reflector	680	860	935	990	1040
Lower end of radiant tube	1595	1820	1900	1950	2000

For example, UX-CDU50 product code explanation:

UX Canadian Factory Product Series Number

CD-Xindier brand radiant heating products.

U--U combination form

50 -- Heating capacity 50kW

(II) Micro-negative pressure (Negative pressure), U-shaped, Single/compound (Complex) series (such equipment is suitable for exhaust gas discharge)

Technical Parameters of UX-CDU()V Series Products

Equipment Model	UX-CDU23V	UX-CDU35V	UX-CDU40V	UX-CDU45V	UX-CDU50V
Heating capacity (kW)	23	35	40	45	50
Heating capacity (kcal/h)	19780	30100	34400	38700	43000
Gas Supply Requirements	Air inlet interface: 1/2 "thread; Natural gas pressure range at the gas inlet of natural gas equipment: 1500Pa ~ 3500Pa, gas pressure at the equipment nozzle: 875Pa; The pressure range of liquefied gas at the air inlet of liquefied gas equipment is 3000Pa ~ 5000Pa, and the gas pressure at the equipment nozzle is 2625Pa.
Gas consumption of natural gas (m³) Gas calorific value: 9000kcal/m³	2.19	3.33	3.81	4.29	4.76
LPG gas consumption (m^₃) Calorific value of gas: 25000kcal/m³	0.79	1.20	1.38	1.55	1.72
Power Supply Requirements	220V，50Hz； Single negative pressure equipment, power distribution of each set of equipment: 125W (including burner: 5W, terminal type II fan: 120W); Power distribution of 2 sets of equipment composite system: (burner: 5W, type III fan: 370W); Power distribution of 3/4 sets of equipment composite system: (burner: 5W, type IV fan: 750W).
Total length (m)	3.5	6.5	6.5	9.5	9.5
Total width (mm)	916	916	916	916	916
Total height (mm)	373	373	373	373	373
Fresh Air Duct and Exhaust Duct Interface size (mm)	102
Recommended minimum installation height (m)	3.1	4.3	4.8	5.0	5.2
Weight (kg)	52	83	83	114	114
With spoiler	√	√	×	×	×
Distance from combustibles (mm)
Upper end of reflector	50	100	100	100	100
Both ends of the reflector	680	860	935	990	1040
Lower end of radiant tube	1595	1820	1900	1950	2000